|
|
SLIMLINE
SL Models 2.5, 5, 15, 25, AND 50
 |
THE PERFECT SOLUTION; THE
RIGHT PRICE
Simple, reliable, good
looks and the right price - everything you’d
expect from a Conair dryer. The Conair SlimLine
Series of Compressed Air Dryers offer a
cost-effective drying solution for any low
throughput applications and most resins.
The SlimLine is
desiccant-free, moving parts are eliminated, energy
consumption and maintenance costs are minimal.
This is the perfect
solution for efficient drying at an affordable
price.
More information
(below). You can also order
online.
|
|
|
|
COMPACT DESIGN INSTALLS TO MACHINE THROAT |
|
These small-sized,
light-weight dryers are easy to handle and can be
conveniently mounted onto the throat of your
processing machine saving precious floor
space.
SlimLine dryers use a
continuous supply of clean, dehumidified compressed
air at 100 psi {6.9 bar} to dry material. The
standard dryer produces a dewpoint of O° F {-18°C}
which is sufficient for most drying applications.
With the use of an optional membrane, process air
can be generated with a dewpoint of -40°F
{-40°C}.
Units are capable of
delivering nominal throughput rates ranging from
0.25 {0.11} to more than 50 lb/hour {23
kg/hour}.
Operation of this dryer
couldn’t be easier: adjust the regulator, flip the
switch to on, set the process temperature and you’re
drying.
How it
works |
- Easy to
use
Installation is quick and easy. The on-board
control is simple to learn - all functions are
clearly identified right on the dryer label. You
won’t even have to think about this dryer once
you start processing.
- No
maintenance required
No moving parts, no filters to contend with on
standard units, no desiccant. This dryer will
deliver the reliable performance you need.
- Compact
design
This slim, attractive dryer mounts easily to the
throat of your machine. No need to buy or mount
a separate hopper, the hopper for the SlimLine
is incorporated into the sturdy, yet
light-weight design.
- Saves
you money
Energy efficient and low cost initial
investment, the Conair SlimLine Series of
Compressed Air Dryers are a fraction of the
price of traditional dryers. Dryer start-up is
intuitive.
|
 The
SlimLine Compressed Air Dryer uses clean,
dehumidified compressed air* supplied from your
plant’s compressed air system or a portable air
compressor to produce hot, low dewpoint air that
removes moisture from hygroscopic plastic
materials. *Compressed
air must meet specification requirement of 100 psi
{6.9 bar} and 40°F {4°C} dewpoint and a residual
oil content of less than 3mg/m3.
The
benefits
- You’ll
save money. The initial investment
in a compressed air dryer costs far less than
conventional dryers.
- You
won’t have to deal with desiccant.
The use of desiccant has been
eliminated.
- You’ll
eliminate the hassle of up-keep maintenance.
No moving parts, no desiccant, no filter on
standard units. This dryer ends the need for a
lengthy list of standard maintenance
procedures.
|
 |
Clean, dry air is
expanded to low pressure during the process of
passing through the air regulator. Expanding the air
reduces the dewpoint. The regulator is also used to
adjust the air flow to the green range on the
pressure gauge. |
 |
Next, the air passes
through an electric heater where its’ temperature
is raised to the process setpoint temperature. |
 |
Then, the air is
injected into the hopper where it passes over the
pellets and reduces the final moisture content of
the plastic material to acceptable processing
levels. The air exhausts from the hopper into the
atmosphere. |
Features
Loader
fill or Hand-fill feature (model dependent) |
Models SL2.5 and SL5 come standard with a
hand-fill lid. |
Models SL15, SL25 and SL50 come standard with an
IB06 mounting interface for mounting a
loader.
The loader is sold
separately. This unit is pictured with an Access
AL Series Loader installed. |
| Simple,
reliable control |
|
| You’ll
have all the functionality you need and not be
burdened by an overly complicated control. Actual
and setpoint drying temperatures are continuously
displayed. Control functions are identified right
on the label. Toggle between the percentage output
of the heater (read only) and the high temperature
alarm setpoint. Choose to view the temperature in
fahrenheit or celsius.
Click to enlarge
|
A
SlimLine to fit your application
The right technology for the right price,
throughputs range from 0.25 {0.11} to 50 lb/hr
{23kg/hour}. |
Select
the right dryer* for your application
 |
Identify
the resin and throughput rate. Use the chart
to quickly select the correct dryer model for
your throughput rate. |
 |
Select
the dryer model and options to suit your
application. |
|
 |
Specifications
|
|
|
