Thermolator® heaTrac
(HTR1-500 and HTR2-500)
Oil Temperature Controller
Model HTR1-500
single zone
|
CONSISTENT,
HIGH
HEAT
TEMPERATURE
CONTROL
The Thermolator
heaTrac oil temperature controller circulates heat
transfer oil, adding or removing heat as needed to
maintain a precise process temperature.
Certain materials
and processes require the use of oil as a heat
transfer fluid for precise temperature control.
Unlike water or glycol mixtures, oil can be safely
operated at temperatures ranging from 70ºF to
500ºF. |
| Single
or dual zone models available |
Use the heaTrac oil
temperature controller when your application requires
process temperatures above 250ºF.
Typical applications
include thermoplastic resins, reactor vessels, roll
stands or platen presses.
Specify single zone if
you need one temperature throughout your mold or dual
zone if two different setpoints are required.
The optional heat
exchanger cooling circuit is recommended for process
cooling or end-ofcycle cooling.
- LOW-WATT
DENSITY HEATER
Does not allow your oil to heat up to the point of
degradation giving longer life to your oil.
- AIR
COOLED PUMP SEALS
No need to supply water to the unit to cool the
seals. Aircooled seals extend the life of the seal
and eliminate the need for an additional water
connection.
- LIFT-OFF
ACCESS PANELS
Convenient, tool-free access to internal components.
The cabinet lifts away for easy servicing.
- STATE-OF-THE-ART
CONTROLS
Easy to use microprocessor controls provide accurate
temperature control. Auto-tuning of the PID control
parameter provides uniform temperature control
regardless of light or heavy external loading.
- COMPACT,
STURDY DESIGN
Small footprint. Designed for efficient use of your
valuable floor space.
| Features: |
 |
| Options: |
 |
Alarm
packages
Call attention to alarm conditions with a bell,
strobe or horn. |
| Digital
microprocessor controls provide simultaneous
display of the process and setpoint temperatures.
These waterproof, durable controls come with
unparalleled standard features.
TH-1 Control
 heaTrac
Control (TW-1)
Our waterproof, durable control is operator
friendly and smart. Standard features:
- Automatic
fine-tuning of PID control parameters provides
uniform temperature control regardless of
external loading.
- Adjustable
high/low deviation warnings track with your
setpoint temperature. Pre-programmed
acceleration feature speeds up setting
parameters.
- 18 operating and
fault indicator lights, including 7 bi-color
LEDs, tell you the status of critical
components and parameters.
- Password entry
prevents unauthorized or accidental changes to
operating parameters.
- RS485
communication using SPI protocol. Baud rates
and addresses are programmable on the operator
panel.
TH-2 Control
 heaTrac
Plus Control (TW-2)
Includes all of the features of the standard
heaTrac control, PLUS:
- Autostart
capability for convenient preheating of
molds.Works with external timers or
switches.
- Choice of
temperature control points allows you to
monitor and control from the process supply or
process return temperature, or from an average
of the two.
- Phase detection
circuit indicates incorrect pump rotation or
an open electrical leg.
- Remote control
up to 50 feet. Magnetic panel back allows you
to place the controls where you need them.
Comes with 15-foot cable. Lengths of 30 or 50
feet optional. Note: The purge option is not
available on the heaTrac positive/negative
pressure water temperature controllers.
| Specifications:
|
 |
|
|
